Author Index

A

  • Aghasi, Amir Modelling of rutting behavior of modified polymer asphalt mixture using artificial neural network [Volume 35, Issue 3, 2022, Pages 69-88]
  • Aldirawi, Neamah Risk Assessment of the Shatt Al-Arab Overflow in Basra [Volume 35, Issue 2, 2022, Pages 49-62]
  • Ameri, Amirhosein Investigation of the relationship between SEM test results and TSR parameter for measuring the moisture sensitivity index of asphalt mixtures containing anti-stripping agents [Volume 35, Issue 1, 2022, Pages 1-12]
  • Ameri, Mahmoud Investigation of the relationship between SEM test results and TSR parameter for measuring the moisture sensitivity index of asphalt mixtures containing anti-stripping agents [Volume 35, Issue 1, 2022, Pages 1-12]
  • Amini, Mohadeseh Effect of Different Chemical Quality Pore Fluids on the Relationship Between Suction and Swelling Characteristics of an Expansive Soil [Volume 35, Issue 2, 2022, Pages 1-18]
  • Amini, Mohadeseh Comparison of the effect of Cement, Ground Granulated Blast Furnace Slag (GGBS), and activated GGBS on stabilization of a clay soil [Volume 35, Issue 3, 2022, Pages 89-106]
  • Ansari, Taha The Influence of Soil Particle Size Distribution on the Abrasion of EPB Machine Cutting Tools [Volume 35, Issue 4, 2022, Pages 17-34]
  • Ashrafy, Elham Modeling the effects of vehicle specifications on traffic density [Volume 35, Issue 2, 2022, Pages 19-34]

B

  • Bagherzadeh, Amir Modelling of rutting behavior of modified polymer asphalt mixture using artificial neural network [Volume 35, Issue 3, 2022, Pages 69-88]
  • Baharzade, Hosein Modeling the effects of vehicle specifications on traffic density [Volume 35, Issue 2, 2022, Pages 19-34]
  • Bargegol, Iraj Discovering the Factors Affecting the Severity of Heavy Vehicle Crashes on Rural Roads Using Logit Regression [Volume 35, Issue 2, 2022, Pages 75-86]

C

  • Chakeri, Hamid The Influence of Soil Particle Size Distribution on the Abrasion of EPB Machine Cutting Tools [Volume 35, Issue 4, 2022, Pages 17-34]

D

  • Dabiri, Rouzbeh Investigation of the arching in rock-fill dam ten years after end construction using Numerical analysis and monitoring [Volume 35, Issue 1, 2022, Pages 59-74]
  • Dalvand, Ahmad Evaluation of mechanical properties of concrete by replacing natural aggregates with fine and coarse recycled aggregates [Volume 35, Issue 4, 2022, Pages 87-110]
  • Darbor, Mohammad The Influence of Soil Particle Size Distribution on the Abrasion of EPB Machine Cutting Tools [Volume 35, Issue 4, 2022, Pages 17-34]
  • Dezvareh, Reza The Influence of Ground Motion Duration on Maximum Displacement of Elasto-Plastic SDOFs [Volume 35, Issue 1, 2022, Pages 75-88]

E

  • Eskandari, Roya Estimation of hydraulic conductivity of Asaluyeh Aquifer using empirical equations based on particle size distribution [Volume 35, Issue 2, 2022, Pages 63-74]
  • Eskandarian, Vahid Evaluation of the seismic performance of braced pin fuse frame using friction [Volume 35, Issue 3, 2022, Pages 19-36]
  • Esmaeiltabar nesheli, Parisa A simplified model for dual wall-frame system [Volume 35, Issue 1, 2022, Pages 31-44]
  • Etemadfard, Hossein Risk Assessment of the Shatt Al-Arab Overflow in Basra [Volume 35, Issue 2, 2022, Pages 49-62]

F

  • Farajnia, Rasoul Investigation of the arching in rock-fill dam ten years after end construction using Numerical analysis and monitoring [Volume 35, Issue 1, 2022, Pages 59-74]
  • Fatemi, Saeed Investigation of the relationship between SEM test results and TSR parameter for measuring the moisture sensitivity index of asphalt mixtures containing anti-stripping agents [Volume 35, Issue 1, 2022, Pages 1-12]
  • Fatemi, Saeed Discovering the Factors Affecting the Severity of Heavy Vehicle Crashes on Rural Roads Using Logit Regression [Volume 35, Issue 2, 2022, Pages 75-86]
  • Fattahi, Hadi Estimation of the most important geomechanical parameter of unsaturated soils using different artificial intelligence methods [Volume 35, Issue 2, 2022, Pages 35-48]
  • Fattahi, Hadi Predicting the most important geomechanical parameter of rock mass using the harmony search and teaching learning based optimization algorithms [Volume 35, Issue 3, 2022, Pages 1-18]
  • Fijani, Elham Estimation of hydraulic conductivity of Asaluyeh Aquifer using empirical equations based on particle size distribution [Volume 35, Issue 2, 2022, Pages 63-74]

G

  • Gerami, Mohsen Evaluation of the seismic performance of braced pin fuse frame using friction [Volume 35, Issue 3, 2022, Pages 19-36]
  • Ghaedi, Hossein Predicting the most important geomechanical parameter of rock mass using the harmony search and teaching learning based optimization algorithms [Volume 35, Issue 3, 2022, Pages 1-18]

H

  • Hajimohammadi, MohammadHossein The Influence of Ground Motion Duration on Maximum Displacement of Elasto-Plastic SDOFs [Volume 35, Issue 1, 2022, Pages 75-88]
  • Hatami, Farzad Investigation The Effect of Rebars and Joint Using Glass Fiber Reinforced Polymer on The Reinforced Concrete Beams [Volume 35, Issue 1, 2022, Pages 45-58]
  • Hazeghian, Mohammad Proposal of a design method for soil-nailed walls and compare it with the conventional design method [Volume 35, Issue 3, 2022, Pages 37-52]
  • Heyrani Moghaddam, Sina Numerical investigation of the seismic behavior of self-centering post-tensioned concrete wall system with friction-based damper [Volume 35, Issue 3, 2022, Pages 53-68]
  • Hosseini, Sayyed Ali Developing a prediction model for rutting depth of warm mix asphalt mixture using neural network [Volume 35, Issue 4, 2022, Pages 1-16]

I

  • Imani Jajarmi, Peyman Effect of Substrate and Epoxy Temperature on the Bond Strength of GFRP Laminates Using Pull-off and Twist-off Tests [Volume 35, Issue 1, 2022, Pages 13-30]

J

  • Jamali Dizji, Maryam Estimation of hydraulic conductivity of Asaluyeh Aquifer using empirical equations based on particle size distribution [Volume 35, Issue 2, 2022, Pages 63-74]
  • Jiryaee, Fatemeh Estimation of the most important geomechanical parameter of unsaturated soils using different artificial intelligence methods [Volume 35, Issue 2, 2022, Pages 35-48]

K

  • Kharaghani, Hamed Risk Assessment of the Shatt Al-Arab Overflow in Basra [Volume 35, Issue 2, 2022, Pages 49-62]
  • Khezrian, Sohrab Effect of Different Chemical Quality Pore Fluids on the Relationship Between Suction and Swelling Characteristics of an Expansive Soil [Volume 35, Issue 2, 2022, Pages 1-18]
  • Khodaie, Nahmat Investigation of the effect of the mass and installation height of TMD system on the wind-induced vibration control of tall buildings [Volume 35, Issue 4, 2022, Pages 53-72]
  • Khosravi, Horr A simplified model for dual wall-frame system [Volume 35, Issue 1, 2022, Pages 31-44]
  • Khosravi, Horr The Influence of Ground Motion Duration on Maximum Displacement of Elasto-Plastic SDOFs [Volume 35, Issue 1, 2022, Pages 75-88]

M

  • Mahmoudi, Musa Identification of Apparent Welding Defects Using Computer Vision Based On Deep Learning [Volume 35, Issue 4, 2022, Pages 73-86]
  • Malekmahmoudi, Farshad Predicting the most important geomechanical parameter of rock mass using the harmony search and teaching learning based optimization algorithms [Volume 35, Issue 3, 2022, Pages 1-18]
  • Mazaheri, Mehdi Backward Solution (in-time) of the Pollution Transport Equation in River Using Group Preserving Scheme [Volume 35, Issue 4, 2022, Pages 35-52]
  • Mirzaei, Alireza Investigation The Effect of Rebars and Joint Using Glass Fiber Reinforced Polymer on The Reinforced Concrete Beams [Volume 35, Issue 1, 2022, Pages 45-58]
  • Mozafari, Morteza Estimation of hydraulic conductivity of Asaluyeh Aquifer using empirical equations based on particle size distribution [Volume 35, Issue 2, 2022, Pages 63-74]
  • MV Samani, Jamal Backward Solution (in-time) of the Pollution Transport Equation in River Using Group Preserving Scheme [Volume 35, Issue 4, 2022, Pages 35-52]

O

  • Omidinasab, Fereydoon Evaluation of mechanical properties of concrete by replacing natural aggregates with fine and coarse recycled aggregates [Volume 35, Issue 4, 2022, Pages 87-110]

R

  • Rabieefar, Hamid Reza Investigation The Effect of Rebars and Joint Using Glass Fiber Reinforced Polymer on The Reinforced Concrete Beams [Volume 35, Issue 1, 2022, Pages 45-58]
  • Raeesi Estabragh, Ali Effect of Different Chemical Quality Pore Fluids on the Relationship Between Suction and Swelling Characteristics of an Expansive Soil [Volume 35, Issue 2, 2022, Pages 1-18]
  • Raeesi Estabragh, Ali Comparison of the effect of Cement, Ground Granulated Blast Furnace Slag (GGBS), and activated GGBS on stabilization of a clay soil [Volume 35, Issue 3, 2022, Pages 89-106]
  • Rahmaninezhad Asil, Mohammad Discovering the Factors Affecting the Severity of Heavy Vehicle Crashes on Rural Roads Using Logit Regression [Volume 35, Issue 2, 2022, Pages 75-86]
  • Rouhi fariman, , Mahsa Developing a prediction model for rutting depth of warm mix asphalt mixture using neural network [Volume 35, Issue 4, 2022, Pages 1-16]

S

  • Saadat, Amir mohammad Backward Solution (in-time) of the Pollution Transport Equation in River Using Group Preserving Scheme [Volume 35, Issue 4, 2022, Pages 35-52]
  • Saadatjoo, Seyed Amir Investigation of the relationship between SEM test results and TSR parameter for measuring the moisture sensitivity index of asphalt mixtures containing anti-stripping agents [Volume 35, Issue 1, 2022, Pages 1-12]
  • Saadatjoo, Seyed Amir Discovering the Factors Affecting the Severity of Heavy Vehicle Crashes on Rural Roads Using Logit Regression [Volume 35, Issue 2, 2022, Pages 75-86]
  • Sarhangi, Aref Evaluation of mechanical properties of concrete by replacing natural aggregates with fine and coarse recycled aggregates [Volume 35, Issue 4, 2022, Pages 87-110]
  • Shaker, Hamid Investigation of the relationship between SEM test results and TSR parameter for measuring the moisture sensitivity index of asphalt mixtures containing anti-stripping agents [Volume 35, Issue 1, 2022, Pages 1-12]
  • Shooshtari, Ahmad Numerical investigation of the seismic behavior of self-centering post-tensioned concrete wall system with friction-based damper [Volume 35, Issue 3, 2022, Pages 53-68]

T

  • Tavakkolizadeh, mohamad reza Effect of Substrate and Epoxy Temperature on the Bond Strength of GFRP Laminates Using Pull-off and Twist-off Tests [Volume 35, Issue 1, 2022, Pages 13-30]
  • Teymouri, Hamed Investigation of the effect of the mass and installation height of TMD system on the wind-induced vibration control of tall buildings [Volume 35, Issue 4, 2022, Pages 53-72]
  • Torbatinejad, Mohsen Modelling of rutting behavior of modified polymer asphalt mixture using artificial neural network [Volume 35, Issue 3, 2022, Pages 69-88]

V

  • Vafaei, Ramin Investigation of the arching in rock-fill dam ten years after end construction using Numerical analysis and monitoring [Volume 35, Issue 1, 2022, Pages 59-74]

Y

  • Youssefi, Abbas Effect of Substrate and Epoxy Temperature on the Bond Strength of GFRP Laminates Using Pull-off and Twist-off Tests [Volume 35, Issue 1, 2022, Pages 13-30]

Z

  • Zarean, Ahmad Investigation of the arching in rock-fill dam ten years after end construction using Numerical analysis and monitoring [Volume 35, Issue 1, 2022, Pages 59-74]
  • Ziaee, Seyed Ali Investigation of the relationship between SEM test results and TSR parameter for measuring the moisture sensitivity index of asphalt mixtures containing anti-stripping agents [Volume 35, Issue 1, 2022, Pages 1-12]